AnalogX AnonyMac 1.00 Crack + License Key
The AnalogX AnonyMac application will allow you to change the MAC address of your network card. What is your MAC address? The easiest way to think about it is that it is your networking hardware's serial number - now these really should be unique, but thanks to global markets and manufacturers that don't really follow the rules too closely, they aren't (but it's pretty unlikely that you're going to just happen to have two devices that do collide).
To change your MAC, simply enter in the new one you'd like to use in the MAC address edit control, and press apply - it will then be set to whichever network connection you currently have selected. The change does NOT take effect immediately, it requires you to either restart the network connection (open up the Network Connections, select the connection, choose 'disable', let it disable, then once that's done select it again and choose 'enable'). This should work in most cases, but if it doesn't then rebooting will pretty much always work - unless for some reason your network card doesn't support changing the NIC, but this is not very common.The actual MAC address can be entered just about any way you like, for example, let's say you have the MAC 1,2,3,4,5,6 - this could be written any one of the following ways: 010203040506 01:02:03:04:05:06 01-02-03-04-05-06 or even: 1.2.3.4.5.6The last one with the periods is a bit special, since it's not actually in hex, it's in decimal (a bit like an IP address) - if you need that format, you're in luck, if you don't, then it doesn't matter. If you would like to remove the modified MAC address, simply erase the MAC address from the edit box, and then press 'Apply' - you will be notified that the software MAC address was removed and the connection will return to its default once it has restarted. Alternatively you can just hit the big 'Restore original MAC' button, whichever way you prefer.The ARP viewer gives you the ability to view the Windows ARP table, where it stores information about other computers it has connected to. In general this is only every going to have computers on your local network, although is some rare instances others might appear. You can right-click on a MAC and copy it to the clipboard for easy reference later on as well.The manufacturer list is actually provided by the IEEE, and is stored in a file (in the same directory as the executable) call 'oui.txt'. The one that is provided in the installer has all the manufacturers, but I've stripped out much of the unused information.
Download AnalogX AnonyMac Crack
| Software developer |
AnalogX
|
| Grade |
4.6
1096
4.6
|
| Downloads count | 9652 |
| File size | < 1 MB |
| Systems | Windows All |
This should work in most cases, but if it doesn't then rebooting will pretty much always work - unless for some reason your network card doesn't support changing the NIC, but this is not very common.
The actual MAC address can be entered just about any way you like, for example, let's say you have the MAC 1,2,3,4,5,6 - this could be written any one of the following ways:
010203040506
01:02:03:04:05:06
01-02-03-04-05-06
or even:
1.2.3.4.5.6
The last one with the periods is a bit special, since it's not actually in hex, it's in decimal (a bit like an IP address) - if you need that format, you're in luck, if you don't, then it doesn't matter. If you would like to remove the modified MAC address, simply erase the MAC address from the edit box, and then press 'Apply' - you will be notified that the software MAC address was removed and the connection will return to its default once it has restarted. Alternatively you can just hit the big 'Restore original MAC' button, whichever way you prefer.
The ARP viewer gives you the ability to view the Windows ARP table, where it stores information about other computers it has connected to. In general this is only every going to have computers on your local network, although is some rare instances others might appear. You can right-click on a MAC and copy it to the clipboard for easy reference later on as well.
The manufacturer list is actually provided by the IEEE, and is stored in a file (in the same directory as the executable) call 'oui.txt'. The one that is provided in the installer has all the manufacturers, but I've stripped out much of the unused information.